How To Make A Boat Targa Top or T-Top Yourself

Fishing Boat Targa Tops versus Bimini Tops

From: Neil Baulch 3 Kingsmere Drive Berwick  Victoria   3806

Hi Fishing & Boating Enthusiast, I have had frustrated fishermen say things to me like :

“This is exactly what I have been looking for, a bimini top is a nuisance”

Are you feeling the same way?
Now at last, a targa bar for your boat  for your fishing boat or tinnie. Fishing can get a whole lot better.Check out the features :-
bimini tops site bulletAs you can see, you get much better access to the water.
           A bimini top has many obstacles in the way, but as you can see here,              so much more room to manoeuvre when casting and landing that                    tricky fish that drags you all around the boat.


  How can you do this………       in this?                                      You need this.
      fighting fish
bimini tops site bullet Plenty of shade from the glaring sun – plenty of room under cover, so you are not cramped or having to crouch down.
bimini tops site bullet Shelter from the cold driving so you can be DRY and fishing.  Oh, I can just feel those freezing fingers fumbling to bait the hook.  Why ever do we do it? Well now you don’t have to.
we need a top in the rain
 bimini tops site bullet You can STAND fully under cover to fish.
            Or sit, whatever you feel like through the day.
Fishing Boat Targa Tops versus Bimini Tops 3


bimini tops site bullet6 Permanent Rod Holders – or 8 if you want.
            No more tangled rods on the floor or the bow of your boat.
fishing rods
bimini tops site bullet Fit the Targa any way that suits you best – at the front, back, middle or turned around and facing the opposite direction.
Tinnie Targa Top forward and reverse Bimini Top
 bimini tops site bullet Sturdy welded construction, providing a handle to steady yourself getting into or out of your boat and plenty strong enough to hold a cover and your fishing rods. 
              Or steady you while holding up the monster of a fish you caught – good one Craig &                 Billy.  In case you are wondering  this cod is 4′ long (1.2 meters) and weighs 52.8 lbs                (24 kgs).

targa top with Craig & Billy

 bimini tops site bullet It Easily folds down for storage and traveling.

           No problem fitting your boat with targa in the garage or the        
          1)   Undo thumb screws and drop cover holder down          
          2) Undo wing bolts and swing Targa down into boat

          This takes all of 1 minute to do: targa folds down into boat                       This,                                             to this,                                to this.

 bimini tops site bullet 1 Year Guarantee – a ‘no obligation’ return policy – if you are         not completely happy with your “How to Build A  Fishing Boat Targa           Top” eBook & Video, for any reason at all,  simply request your money back within 1 year, yes that’s 12 months or 365 days if you prefer 🙂 That gives you heaps of time to give it a good go at it.

Fishing Boat Targa Tops versus Bimini Tops seal
Is your day out fishing being made unpleasant with sunburn or messed up by cold soaking rain?Are you frustrated by rods getting tangled up because there is nowhere to put them out of the way? If you have a bimini top, do you find that the legs and straps take up most of the sides of your boat? And makes it difficult to cast or to get clear access to the water in order to fish. 
Or if you are landing that fighter of a fish, you really don’t want to be fighting with straps and brackets as well as the fish – the big one you don’t want to get away.
Then the Fishing Boat Targa Top has to be the best solution that covers all angles. You can fish longer – in the heat of the day when the sun is beating down, you can stay fishing because you have cover and convenience.
Fishing Boat Targa Tops versus Bimini Tops7
(Notice here that I have been making them out of my garage?)
If it rains or is going to rain, you can still go, or stay out longer when it does.The Fishing Boat Targa Top or Tinnie Targa Top, allows you take more control over your fishing – how, when, where and how long for.
The only question left to answer is Why – Why you are going fishing yet again? When your wife wants to know why 🙂 For the avid fishermen, this Targa Top is great, so much more freedom and more possibilities when you go fishing. One day you might want to sell your boat for another, but you won’t want to sell the Targa Top with it. Would you like to have one of these on your boat? If so, we can help you with that. There is a great new ebook (electronic book) called :
“How To Build A  Fishing Boat Targa Top”
           Better than a Bimini Top ebook


It covers everything you need to know about how to build your own Boat Targa Top.That’s what this brand new e-book could help you to do. And it’s not like any other book you’ve ever seen on making your own Targa bar with a Cover. No fluff, just the real answers you want to know. You’ll discover all types of exciting tips.
Here’s a sneak peek of what you’ll discover in the……
“How To Build Fishing Boat Targa Top”  Step-by-step Manual   :-
  • which aluminum tubing to choose for the best option
  • and where you can can get it
  • how to measure your boat for the top you want
  • a calculator to identify cutting sizes
  • and where exactly to bend it
  • how to easily bend it at home
  • who to take it to for welding
  • what you should be charged – don’t be ripped off
  • what is the best cover fabric to use
  • and where to get it
  • step-by-step how to sew it
  • or the maximum you should have to pay to have it done 
  • how to make simple hinges so the targa top can easily fold down into your boat
  • how to mount the targa top to your boat/tinnie


  • The maximum you should have to pay to get someone to make up the whole thing for you using this manual.


I did tell that this was a step-by-step no-fluff manual and you can see why.I have also made a 20 minute video to help give you an added perspective on how to build your own Boat Targa.  

You can download the ‘how to’ video and watch it as many times as you wish.

image of building Boat Targa Top video

Here are just a few of the pages from the ‘How to’ manual :-

Index page of targa making manual


measuring formula pages of manual and frame The formula for measuring,                                      The frame                              cutting and bending  


making cover and suppliers pages of manual                             Making and fitting the cover                   Materials list & Suppliers

Here is your opportunity to make up a Fishing Boat Targa Top for yourself, from a great DIY boat top manual with step-by-step drawings, photos and a video, so that even a novice can do it AND if you still decide not to build it yourself, we tell you who to ask and for what right price. PLEASE NOTE: Before you purchase this DIY package, bear in mind that you will need to have some aluminum welding done for you if you cannot do it yourself, and the vinyl/acrylic canvas sewn on an industrial sewing machine if you do not know anyone who has an industrial sewing machine. Do any of your friends do these things?  If not, not a problem, we will tell you where to get them done and how much you should have to pay for it too. ADDITION : Welding – As one buyer of this manual (Frank) found, you can fix it together with brazing rod (like soldering) that anyone can do with a cheap blow torch. One buyer did not like this method as it puts a lot of heat into the aluminium tubing. It’s up to you. Sewing –  This same clever buyer came up with another way of fixing the cover to the cover bow, so that  you do not need to do any fancy sewing.                                                                                                                     (Thanks Frank)

Frank sent me some photos of his handy work, check them out :
Franks targa top
And while I am showing you photos of what some buyers have made, here is some pics of the completed targa by John.
You will notice that John opted not to include rod holders on his set up.
                                                                                            (Thanks for the pics John)
John Targa Top Setup
What would you like to do? A couple of things to consider:
1) You could just pay someone to make one up for you, costing  around  
      $2500 maybe, because they have not made one before and they will        
      charge you plenty for trying to figure out how to do it.


2) Whereas, if you were to purchase this manual, you could make one up yourself and save about $1500.

3) Or, you could give this manual to a tradesman to make up a targa from, which would save him having to figure it out and save you maybe a $1000. Just present it to him and say ”I want one like this” and he can’t  charge excessively for having to design and figure out how to make it. You can do it I know because I saw the idea and just figured out how to make them by asking questions, and you don’t even have to figure it out – I’ve done it for you. You can see by my photos that I have made these from my garage. By the way, – if you are thinking that this might be too hard for you to do, consider that I started in this field about 3 years ago, with my daughter’s industrial sewing machine, a few hints from friends, and a trimmer friend living 2000 miles away that I could ask some questions via email.  I am of only average intelligence; even now when I make something I take way too long because I am not a whiz at things. Doing this type of work was to create an income because I was having trouble to get a job. So to quote an old cliché – ‘if I can do it, anybody can do it’ Why do I no longer make them? Simply because I am moving more into an internet business and away from manufacturing. And so all that, is just a fraction of what you’ll find out in :

“How To Build A Fishing Boat Targa Top”

That’s why you should own this book today (in fact, you can be reading it in as little as 5 minutes from now, day or night!)

What’s a resource like this worth?

To learn this by yourself would probably take 2 years and cost heaps (I should know, that’s what did.) Particularly laser-guided accurate information like this – SPECIFICALLY for how to build your own Boat Targa Top. This isn’t some boiler-plate collection of answers, and vaguely described processes.

I went to a lot of trouble to draw, explain, photograph and video how to do it. Everything is explained in PLAIN English. Which means it’s dead-easy to read and understand. And it’s logically laid out.

Which is why “How To Build A Fishing Boat Targa Top” is such a bargain at $27 USD That’s right, a fraction of what it’s really worth or what it cost me to learn. Why would I make it so affordable? Simply because my costs to deliver it to you are so low.

This is an electronic book (e-book) that can be downloaded to your computer in a flash and I do not have to package and post it to you. Which means you can be reading it and discovering all these amazing secrets in as little as 5 minutes from now. So I figure I’ll be able to offer this resource of information to more people and make my investment back over time. No matter what however, it’s a bargain for you.

If you would like to purchase, Click the button to buy through PayPal

(All you need is a credit card, no special internet accounts or anything like that. And it’s totally secure. Your credit card data is passed directly to the bank and no one but the bank has access to your sensitive information.) $27 is a drop in the ocean compared to what you learn with these secrets. And don’t worry, if for any reason you’re not happy with the content, you have a complete guarantee to protect your investment.


Hey, you’re my customer. And if you’re not happy, it looks bad on me. So if you’re not happy with what you discover from “How To Build Fishing Boat Targa Top” I don’t expect … or want … to keep your money. Just simply whip off an email to me and I’ll happily refund your money in full (in fact, I’d be embarrassed to keep it).

That’s about as fair as it gets, don’t you agree? Well let me tell you what I’ll also do to make this the best investment you ever make. I’m going to throw in some free bonuses. Simply grab your copy of “How To Build Better-than-a-Bimini Fishing Boat Targa Top” right now, and here’s what I’ll throw in:

BONUS #1: “A Guide To Saltwater Fishing”

This amazing 160 page bonus is like an encyclopedia of saltwater fishing.

 Fishing Boat Targa Tops versus Bimini Tops bonus book

Take a look at the chapters headings : bonus-book Not bad, right? But that’s not all you get! Because I’m also throwing in : BONUS #2:      7 eBooklets  on :-

• How To Catch Trout    bonus-books2       • How To Catch Grouper • How To Catch Kingfish        • How To Catch Redfish • How To Catch Snook            • How To Catch Pompano • How To Catch Tarpon                                              

YOURS FREE when you order “How To Make A Fishing Boat Targa Top”  Manual? For a mere $27 USD, you’re getting the answers you need … PLUS MORE. Now, you can only get this product from me. It’s not available in libraries or anywhere else on the net. Wishing you great success. Cheers, Neil Baulch 3 Kingsmere Drive Berwick  Victoria   3806 If you have any problem with the download just email me at  :

contact details

Click Here To Buy Through PayPal


Let’s take another look at what you get for just $27 USD :- “How To Build A ‘better-than-a-bimini’ Fishing Boat Targa Top” Manual plus a Video. Fishing Boat Targa Tops versus Bimini Tops manual

Better than a Bimini Top ebook


          Fishing Boat Targa Tops versus Bimini Tops video

And Bonuses :- A Guide to Saltwater Fishing, (160 pages)

    Fishing Boat Targa Tops versus Bimini Tops bonus book                            

7 eBooklets :

 How To Catch Trout             How To Catch Grouper     How To Catch Kingfish         How To Catch Redfish  How To Catch Snook            How To Catch Pompano  How To Catch Tarpon                                              
Fishing Boat Targa Top bonus ebooklets

Would you like to check out our promotional video?

import export training